Archived Mold Remediation Blog Posts
Managing mold growth
When there is water in your home, mold can quickly become an issue. It can cause health issues and damage to your property. SERVPRO of Culpeper & Fauquier has the training, protective gear, and specialized equipment to handle your mold problem.
Call SERVPRO of Culpeper & Fauquier counties
The mold cleanup and restoration process begins when you call us. One of our employees will ask a series of questions to help determine the necessary equipment, resources, and personnel needed.
Your property will be carefully inspected for signs of mold using various technologies to detect mold and hidden water sources. Mold feeds on cellulose and water and can be hidden from plain view.
Different containment procedures will be placed to prevent the spread of mold, like negative air chambers to isolate the contaminated area with physical barriers and negative air pressure to keep the mold spores from spreading during the cleanup process.
Specialized filtration equipment captures microscopic mold spores out of the air. SERVPRO of Culpeper & Fauquier counties technicians use powerful air scrubbers and HEPA vacuums to prevent the spread of these mold spores while the mold remediation is in progress.
The process of mold remediation depends on the amount of mold growth and the type of surface it's on. Anti-fungal and antimicrobial treatments will be used to eliminate mold colonies and help prevent new ones from forming. Removing and disposing of mold-infested porous materials, like drywall and flooring, may be necessary.
SERVPRO of Culpeper & Fauquier counties cleans your furniture, decorative items, curtains, and other restorable items affected by mold. We use a variety of cleaning techniques to clean and sanitize your belongings.
Depending on the level of mold damage, some building materials may have to be removed. Restoration may involve minor repairs or major repairs such as reconstruction
The visible mold was caused by a pipe leak in the bathroom.
SERVPRO of Culpeper & Fauquier counties offers mold remediation and restoration; we have the training, equipment and expertise to better assist you.
We asked our Mold and Biohazard Manager some questions about how this process works.
It is preferred that you have an Industrial Hygienist protocol done.
What is that?
This is a process where air sampling and affected areas are tested to provide a detailed remediation and restoration protocol for SERVPRO of Culpeper & Fauquier counties to follow. There is also a post-test that will take place once we are finished to confirm clearance.
Every time our team handles a mold job, we are required to wear the appropriate PPE (Personal Protective Equipment) which includes items such as coveralls and respirators.
SERVPRO of Culpeper & Fauquier counties will make sure to keep anything deemed salvageable; we go above and beyond to ensure restoration before removal. Unfortunately, in most situations there is a some tear out involved to remove affected areas such as drywall, flooring, and/or furniture.
During the mold remediation process a HEPA vacuum is used, HEPA filters are designed to capture particles as small as mold spores and to insure that they do not get reintroduced. Our mold experts use “negative air” containment, which is created by positioning negative air machines to introduce clean air into the affected area and push contaminated air outside the home.
You want to consider getting your HVAC cleaned as well, the mold spores can collect there and be dispersed throughout the home.
Every mold infestation is different, from the amount of mold to the types of materials affected. Each scenario requires a unique solution, but the general process stays the same. If you have any questions, give us a call today; SERVPRO of Culpeper & Fauquier counties
Visible mold on wood framing
You Can Control Mold
Inside your home you can control mold growth by:
- Controlling humidity levels;
- Promptly fixing leaky roofs, windows, and pipes;
- Thoroughly cleaning and drying after flooding;
- Ventilating shower, laundry, and cooking areas.
If mold is growing in your home, you need to clean up the mold and fix the moisture problem. Mold growth can be removed from hard surfaces with commercial products, soap and water, or a bleach solution of no more than 1 cup of household laundry bleach in 1 gallon of water.
Mold growth, which often looks like spots, can be many different colors, and can smell musty. If you can see or smell mold, a health risk may be present. You do not need to know the type of mold growing in your home, and CDC does not recommend or perform routine sampling for molds. No matter what type of mold is present, you should remove it. Since the effect of mold on people can vary greatly, either because of the amount or type of mold, you can not rely on sampling and culturing to know your health risk. Also, good sampling for mold can be expensive, and standards for judging what is and what is not an acceptable quantity of mold have not been set. The best practice is to remove the mold and work to prevent future growth.
If you choose to use bleach to clean up mold:
- Never mix bleach with ammonia or other household cleaners. Mixing bleach with ammonia or other cleaning products will produce dangerous, toxic fumes.
- Open windows and doors to provide fresh air.
- Wear non-porous gloves and protective eye wear.
- If the area to be cleaned is more than 10 square feet, consult the U.S. Environmental Protection Agency (EPA) guide titled Mold Remediation in Schools and Commercial Buildings. Although focused on schools and commercial buildings, this document also applies to other building types.
- Always follow the manufacturer’s instructions when using bleach or any other cleaning product.
Causes of mold in homes
Mold is a vital piece of nature, assisting with the disintegration of natural matter and the recycling of supplements in biological systems. While outdoor mold is fundamental, mold developing inside present’s health risks and can bring about property damage. Molds recreate by method of minor airborne spores that travel essentially anyplace, even in our homes.
Despite the fact that there are hints of mold spores indoors, they require the right "ingredients" to produce mold. Unfortunately, the conditions for mold development are found in many homes: a nourishment source, (for example, drywall, rugs, and wood), warmth, lack of light, enough time to develop, and above all, dampness. Since dampness is a fundamental factor in mold development, here are the most common culprits that cause heightened dampness in homes:
- Flooding can cause a measurable amount of water into your home, bringing on serious water damage and conceivably cause mold development inside 24-48 hours. Calling an expert restoration professional such as SERVPRO promptly is your best defense with regards to mitigating water damage and preventing mold development.
- Increased humidity can happen in homes from multiple sources — muggy climate, persistent rain, cooking, showering, and so on. To help prevent development of mold growth in your home, ensure your home is all around ventilated and keep the humidity below 55 percent.
- Deficient ventilation leads to increased humidity, and due to this, mold development and different issues like indoor contamination. Try to open entryways as well as windows when viable and to utilize fans as needed.
- Leaking pipes are a typical issue in homes and should be settled promptly. In many cases, leaks are hidden from view, such as inside walls or above the ceiling, so make a point to investigate wall and ceiling stains routinely.
- Roof leaks are additionally a way for water to saturate your home and cause mold. In the event that you see water stains on the ceiling, check for water damage in the attic and have your roof assessed and repaired at the earliest opportunity.
- Condensation happens when warm dampness loaded air interacts with chilly surfaces. Condensation can be seen on walls, windows, solid floors or metal pipes. Reduce condensation by adjusting the humidity in your home.
- Basements give astounding conditions for mold development because of poor ventilation, cooler temperatures (that advance condensation), and incessant water leaks and flooding.
Mold can also grow in various unexpected areas in the home, which can make mold remediation more difficult. For professional mold removal, as well as fire and water restoration services, contact the professional experts at SERVPRO today.